Header

Programmable Logic Controller(Pd No. : 3077034)

(Updated : Jan/13/2017)
product information
Model Nm X8
HS CODE 853710
M.O.Q 1
Ceritification CE UL
Keywords EtherNET, USB port,RS232C,485, Serial Protocol,Network based sytem
Seller ID jcahn89
  • SHARE


   




[Company Introduction]


1. Overview

RS Automation was established with the new brand name “Reliable & Smart” in January 2010 based on 30 years control automation experience from global companies such as Samsung Electronics and Rockwell Automation.

*History

-1985: Manufactured and distributed Hitachi PLC H Series under a technical partnership, Samsung Aerospace

-1989: Launched PLC SPC-300 Series, Samsung Aerospace Launched Servo CSD Series, Samsung Electronics Started the automation business, Samsung Electronics Manufactured and distributed YASKAWA Inverter under a technical partnership, Samsung Aerospace

-1992: Launched PLC NX700 Series, Samsung Electronics

-1995: Launched Inverter Moscon-E3 Series

-2002: Launched PLC NX Series, CSD3 Series

-2004: Launched OEMAX Brand Products in the overseas markets

-2007: Renamed Rockwell Automation Korea

Launched OEMAX Brand in Korea

-2010: Launched Servo CSD5, PLC NX7G Series

Established RS Automation

-2011: Launched PLC NX7R Series

-2012: Launched PLC X8 Series, MMC-X

-2014: Launched Servo CSD7 Series, MMC-EtherCAT

2. Vision

Global Top 5 control solution provider

3. Representative business model

A. Focused Automation Solution

Robot Motion Controller

Network Controller

Drive & Power

B. Engineering & Manufacturing Service

OEM/ODM/Brand Labeling

Technology Licensing

4. Main partners

-Our capabilities include a partner network of more than 50 regional and 15 global distributors.

      (USA, India, Turkey, Poland, England, Iran etc)


[Product Description]


International Standard Industrial Network Establishment of Powerful Scalability and Economic System

The X8 Series PLC is basically equipped with one Ethernet port, two RS232/485 ports, and one USB port. In addition, EtherNet/ IP and Modbus/TCP, the international standard industrial networks, are built-in as the default network protocols, allowing customers to easily respond to the Ethernet-based network environment in the industry sites and configure the network between heterogeneous systems. Its two high-speed serial ports and USB ports offer easy interface with various devices and the SD card, which has been supported by advanced systems only, allows the small-level PLC to provide data logging, and data backup. For scalability, it is the micro-to-small level PLC product that allows economic system expansion, supporting up to 2,560 points and 80 I/O modules.


Application

Semiconductor / FPD industry

• General machinery (Processing, Assembling, Inspection machine)

• Another application other than mfg. machinery (Security, Infrastructure, SCADA, etc.)

• Food & Beverage, Process industry


[Product Features]


• International Standard Industrial Network Implemented

• XGPC Software

• Powerful scalability and flexibility

• Various Additional Functions

• X8 Series PLC network allows various network system implementations suitable for each industry environment.

• Remote programming at a PLC or a computer in the Ethernet and editing and monitoring of programming at a PLC in the Ethernet is achieved.

• Information exchange between link network systems is available and message communication between different models of PLC can be achieved via network.

• Each link Module has a self-diagnosis function (RAS) so no monitoring device is required and the system can be reliably implemented.

• NX Series serial protocol is provided to access the existing network system.

• The CIP-based international standard industrial networks, such as EtherNet/IP and Modbus/TCP, are supported for superior scalability.



[Product  Specifications]


-CPU Module : With four built-in communication ports (Ethernet, USB, two RS232C/485 selectable high-speed serial ports) and the international standard industrial network protocols, powerful network/communication environment can be configured. In addition, various and accurate control is achieved through rich memory (program memory 60K steps and data memory 64K words) and various commands.


-Power Module

 Features

1. Input Voltage : 100-240V AC Free Voltage

2. Easy-to-install DIN rail & screw structure

3. Output voltage : 24V DC/3A

4. Protective functions : Short/Overcurrent/Overvoltage

5. Heat-radiating design using air convection

6. Load sharing

7. Power ride-through capability (Dip 100% 20ms for full load)

8. RoHS-compliant

9. Expected Lifetime : 100,000 hours (based on room temperature 25°C)

-Input Module

 Features

1. 16 points, 32 points input module

2. All DC input types of +, - COMMON are available.

3. LED operation indicator

4. Photocoupler insulation of all modules

5. Improved user convenience with the removable terminal block (16-point module)


-Output Module

 Features

1. 16-point, 32-point output module

2. LED operation indicator

3. Photocoupler insulation of all modules

4. Improved user convenience with the removable terminal block (16-point module)

-Analog Input Module (A/D) : A high-speed and high-precision module that greatly improves the conversion speed and resolution, the performance indexes of an analog input.


-Analog Output Module (D/A) : A high-speed and high-precision module that greatly improves the conversion speed and resolution, the performance indexes of an analog output.


-RTD Module (Resistance Temperature Detector Module) : Resistance Temperature Detector module controls the external conversion values entered directly from the temperature sensor.  The 24-bit Σ-Δ A/D converter enables high-precision and high-speed processing and wide I/O range and self-calibration feature are also implemented.


-TC Module (Thermocouple module) : Thermocouple module controls the external conversion values entered directly from the temperature sensor. The 24-bit Σ-Δ A/D converter enables high-precision and high-speed processing and wide I/O range and self-calibration feature are also implemented.


-Positioning Module: The 1-axis, 2-axis, and 4-axis module allows high-speed and high-precision positioning at the speed command of 4 Mpps in maximum. The start-up time is 1 ms or less and flexible start-up/stop is achieved by S-curve acceleration/ deceleration.  This module includes pulse generator features that allows real-time output to the manual pulse generator (MPG).

-Serial Communication Module (SCU2) : The Serial Communication Module(SCU) is an extension serial communication module that can be used when extra communication ports, in addition to 2 ports in the base (CPU) module, are required. The X8 PLC ladder program enables various implementation of ASCII communication, binary communication (Hex) and user-defined protocols. Moreover, isolation between two ports enhances the quality of communications.

 

-Remote Master Module (RNM): X8_RNM is the remote master module of the X8 PLC, which is capable of remotely controlling remote I/Os that are connected to a remote network. The remote module adopts our DS60 Series modules that have been successfully proven in the market, providing fl exible scalability and intercompatibility between X8 PLC and DIO products.


-DeviceNet Master Module (DNM) : X8_DNM is the DeviceNet Scanner(Master) module of the X8 PLC, which provides controls over devices connected to the DeviceNet network. This module is certified by the ODVA conformance test and conforms to DeviceNet specification v2.0.  


-Expansion System (Expansion I/O) : The basic X8 PLC system can accommodate a maximum of 12 modules. It uses the expansion system to connect up to 80 I/Os and controls I/Os that are up to 100m away. I/Os can be extended by combining EB2RJ, EB2EB and RJ2EB. Use of high-speed E-Bus allows smooth expansion without compromising its speed.


-XGPC Software: XGPC software is the international standard IEC 61131-3 compliant software for X8 Series PLC. It supports various functions including ladder editing, online editing, monitoring, debugging, file management, time chart monitoring, and etc. Additional functions including FBD, ST, and IL will be supported later.


-X8 Position Manager Software: X8 Position Manger is the software that allows control of the position module of RS Automation X8 PLC. It provides functions including Read/Write Positioning Parameters, Input/Output Data Monitoring and Data Import/Export.



YouTube PLAY

Company Information

company information
Contact Person AHNJONGCHAN
Company RS automation
Address
Homepage www.rsautomation.co.kr , http://seller.buykorea.org/rs-automation--1084224
Tel 0316859300 Fax 0316859500
Biz. Type Est. Year
Employees Annual Export USD 0~1 mn
Related Business Event List
World-class Product Show 2017 2017-11-23 ~ 2017-11-23
Go to the top of the page
Loading...